Display Tcp - HP MSR Series Command Reference Manual

Field
Inpcb flags
Inpcb extflag
Inpcb vflag
TTL

display tcp

Use display tcp to display brief information about TCP connections.
Description
Flags in the Internet PCB:
•
INP_RECVOPTS—Receives IP options.
•
INP_RECVRETOPTS—Receives replied IP options.
•
INP_RECVDSTADDR—Receives destination IP address.
•
INP_HDRINCL—Provides the entire IP header.
•
INP_REUSEADDR—Reuses the IP address.
•
INP_REUSEPORT—Reuses the port number.
•
INP_ANONPORT—Port number not specified.
•
INP_RECVIF—Records the input interface of the packet.
•
INP_RECVTTL—Receives TTL of the packet. Only UDP and RawIP
support this flag.
•
INP_DONTFRAG—Sets the Don't Fragment flag.
•
INP_ROUTER_ALERT—Receives packets with the router alert option.
Only RawIP supports this flag.
•
INP_PROTOCOL_PACKET—Identifies a protocol packet.
•
INP_RCVVLANID—Receives the VLAN ID of the packet. Only UDP
and RawIP support this flag.
•
INP_RCVMACADDR—Receives the MAC address of the frame.
•
INP_SNDBYLSPV—Sends through MPLS.
•
INP_RECVTOS—Receives TOS of the packet. Only UDP and RawIP
support this flag.
•
INP_USEICMPSRC—Uses the specified IP address as the source IP
address for outgoing ICMP packets.
•
INP_SYNCPCB—Waits until Internet PCB is synchronized.
•
N/A—None of the above flags.
Extension flags in the Internet PCB:
•
INP_EXTRCVPVCIDX—Records the PVC index of the received
packet.
•
INP_RCVPWID—Records the PW ID of the received packet.
•
N/A—None of the above flags.
IP version flags in the Internet PCB:
•
INP_IPV4—IPv4 protocol.
•
INP_TIMEWAIT—In TIMEWAIT state.
•
INP_ONESBCAST—Sends broadcast packets.
•
INP_DROPPED—Protocol dropped flag.
•
INP_SOCKREF—Strong socket reference.
•
INP_DONTBLOCK—Do not block synchronization of the Internet
PCB.
•
N/A—None of the above flags.
TTL value in the Internet PCB.
269