HP MSR Series Command Reference Manual page 177

Local IP address information:
Start address
172.16.1.1
192.168.1.1
192.168.3.1
Global IP pool information:
Start address
201.1.1.1
201.1.1.21
Port block group 2:
Port range: 10001-30000
Block size: 500
Local IP address information:
Start address
10.1.1.1
Global IP pool information:
Start address
202.10.10.101
Port block group 3:
Port range: 1-65535
Block size: 256
Local IP address information:
Start address
---
Global IP pool information:
Start address
---
NAT outbound port block group information:
Totally 2 outbound port block group items.
Interface: GigabitEthernet2/0/2
Port block group: 2
Config status
Global flow-table status: Active
Local flow-table status: Active
Interface: GigabitEthernet2/0/2
Port block group: 10
Config status
Reasons for inactive status:
The following items don't exist or aren't effective: port block group.
Global flow-table status: Active
Local flow-table status: Active
# (Distributed devices in IRF mode.) Display all NAT configuration information.
<Sysname> display nat all
End address
172.16.1.254
192.168.1.254
192.168.3.254
End address
201.1.1.10
201.1.1.25
End address
10.1.10.255
End address
202.10.10.120
End address
---
End address
---
: Active
: Inactive
163
VPN instance
---
vpna
vpna
VPN instance
vpnb
VPN instance
---