Display Ipv6 Interface Prefix - HP MSR Series Command Reference Manual

Field
(s): spoofing
Interface
Physical
Protocol
IPv6 Address

display ipv6 interface prefix

Use display ipv6 interface prefix to display IPv6 prefix information for an interface.
Syntax
display ipv6 interface interface-type interface-number prefix
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Examples
# Display IPv6 prefix information for VLAN-interface 10.
<Sysname> display ipv6 interface vlan-interface10 prefix
Prefix: 1001::/65
Age: -
Lifetime(Valid/Preferred): 2592000/604800
Prefix: 2001::/64
Age: -
Lifetime(Valid/Preferred): 3000/2000
Description
Spoofing attribute of the interface. The link protocol state of the interface is
up, but the link is temporarily established on demand or does not exist.
Name of the interface.
Physical state of the interface:
•
*down—The interface has been administratively shut down by using the
shutdown command.
•
down—The interface is administratively up but its physical state is down,
possibly because of a connection or link failure.
•
up—The administrative and physical states of the interface are both up.
Link layer protocol state of the interface:
•
down—The network layer protocol state of the interface is down.
•
up—The network layer protocol state of the interface is up.
IPv6 address of the interface.
•
If at least one global unicast address is configured, this field displays the
lowest address.
•
If no global unicast address is configured, this field displays the link-local
address.
•
If no address is configured, this field displays Unassigned.
311
Origin: ADDRESS
Flag: AL
Origin: STATIC
Flag: L