HP MSR Series Command Reference Manual page 494

Registered port : 2158
Behind NAT : Yes
# Display detailed IPv4 address mapping information for the VAM client with private IPv4 address
10.0.0.1 in ADVPN domain 1.
<Sysname> display vam server address-map advpn-domain 1 private-address 10.0.0.1 verbose
ADVPN domain name : 1
Private address : 10.0.0.1
Type : Hub
Hub group : 1
Holding time : 0H 13M 34S
Link protocol : UDP
Public address : 2001::1
Public port : 10018
Registered address: 2001::1
Registered port : 10018
Behind NAT : No
Table 100 Command output
Field
Private address
Type
Hub group
Holding time
Link protocol
Public address
Public port
Registered address
Registered port
IPsec address
IPsec port
Behind NAT
Description
Private address that the VAM client has registered with the VAM server.
VAM client type: Hub or Spoke.
Hub group to which the VAM client belongs.
Duration time that elapses since the VAM client successfully registered with
the server, in the format of xH yM zS.
Link layer protocol used by the VAM client for ADVPN tunnel establishment:
•
UDP.
•
GRE.
•
IPsec-UDP.
•
IPsec-GRE.
VAM client's public IP address that has been NATed.
VAM client's ADVPN port number that has been NATed.
This field is displayed when the Link protocol is UDP or IPsec-UDP.
Public address that the VAM client has registered with the VAM server.
ADVPN port number that the VAM client has registered with the VAM
server.
This field is displayed when the Link protocol is UDP or IPsec-UDP.
IP address used by the VAM client for IPsec tunnel establishment.
This field is displayed when the Link protocol is IPsec-UDP or IPsec-GRE.
UDP port number used by the VAM client for IPsec tunnel establishment.
This field is displayed when the Link protocol is IPsec-UDP or IPsec-GRE.
Whether NAT traversal is used, No or Yes.
480