Display Nat Port-Block-Group - HP MSR Series Command Reference Manual

# Display dynamic NAT444 mappings.
<Sysname> display nat port-block dynamic
Slot 0:
Local VPN
---
Total entries found: 1
# Display DS-Lite NAT444 mappings.
<Sysname> display nat port-block dynamic ds-lite-b4
Slot 0:
Local VPN
---
Total entries found: 1
Table 39 Command output
Field
Static port-block mapping tables
Dynamic port-block mapping tables
Local VPN
Local IP
DS-Lite B4 addr
Global IP
Port block
Connections

display nat port-block-group

Use display nat port-block-group to display information about NAT port block groups.
Syntax
display nat port-block-group [ group-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-number: Specifies the ID of a port block group. The value range for this argument is 0 to 65535.
If you do not specify this argument, the command displays information about all port block groups.
Examples
# Display information about all port block groups.
<Sysname> display nat port-block-group
Local IP Global IP
101.1.1.12 192.168.135.201
DS-Lite B4 addr Global IP
2000::2 192.168.135.201
Description
Information about static port-block mappings.
Information about dynamic port-block mappings.
VPN to which the private IP address belongs. If the private IP address
does not belong to any VPN, this field displays hyphens (---).
Private IP address.
IPv6 address of the DS-Lite B4 element.
Public IP address.
Port block defined by a start port and an end port.
Number of connections established by using the ports in the port block.
Port block
10001-11024
Port block
10001-11024
187
Connections
1
Connections
1