Ipv6 Reassemble Local Enable; Ipv6 Redirects Enable - HP MSR Series Command Reference Manual

Related commands
display ipv6 prefix

ipv6 reassemble local enable

Use ipv6 reassemble local enable to enable IPv6 local fragment reassembly.
Use undo ipv6 reassemble local enable to restore the default.
Syntax
ipv6 reassemble local enable
undo ipv6 reassemble local enable
Default
IPv6 local fragment reassembly is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The IPv6 local fragment reassembly function enables the receiving LPU to reassemble the IPv6 fragments
instead of delivering them to the active MPU for reassembly. It improves the fragment reassembly
performance.
This function applies only to fragments received by the same LPU.

ipv6 redirects enable

Use ipv6 redirects enable to enable sending ICMPv6 redirect messages.
Use undo ipv6 redirects enable to disable sending ICMPv6 redirect messages.
Syntax
ipv6 redirects enable
undo ipv6 redirects enable
Default
Sending ICMPv6 redirect messages is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The default gateway sends an ICMPv6 redirect message to the source of an IPv6 packet to inform the
source of a better first hop.
368