Ipv6 Address Dhcp-Alloc - HP MSR Series Command Reference Manual

Field
Invalid
Packets sent
Solicit
Request
Renew
Rebind
Information-request
Release
Decline
Related commands
reset ipv6 dhcp client statistics

ipv6 address dhcp-alloc

Use ipv6 address dhcp-alloc to configure an interface to use DHCPv6 for IPv6 address acquisition.
Use undo ipv6 address dhcp-alloc to cancel an interface from using DHCPv6, and clear the obtained
IPv6 address and other configuration parameters.
Syntax
ipv6 address dhcp-alloc [ option-group option-group-number | rapid-commit ] *
undo ipv6 address dhcp-alloc
Default
An interface does not use DHCPv6 for IPv6 address acquisition.
Views
Layer 3 Ethernet interface/subinterface view
Layer 3 aggregate interface/subinterface view
VLAN interface view
Predefined user roles
network-admin
Parameters
option-group option-group-number: Enables the DHCPv6 client to create a dynamic DHCPv6 option
group for saving the configuration parameters, and assigns an ID to the option group. The value range
for the ID is 1 to 100. If you do not specify this option, the DHCPv6 client does not create any dynamic
DHCPv6 option groups.
rapid-commit: Supports rapid address or prefix assignment.
Description
Number of invalid packets.
Number of sent packets.
Number of sent Solicit packets.
Number of sent Request packets.
Number of sent Renew packets.
Number of sent Rebind packets.
Number of sent Information-request packets.
Number of sent Release packets.
Number of sent Decline packets.
427