Ipv6 Nd Ra No-Advlinkmtu - HP MSR Series Command Reference Manual

Parameters
max-interval-value: Specifies the maximum interval for advertising RA messages in seconds, in the range
of 4 to 1800.
min-interval-value: Specifies the minimum interval for advertising RA messages, in the range of 3
seconds to three-fourths of the maximum interval.
Usage guidelines
The device advertises RA messages at intervals of a random value between the maximum interval and
the minimum interval.
The maximum interval for sending RA messages should be less than or equal to the router lifetime in RA
messages.
Examples
# Set the maximum interval for advertising RA messages to 1000 seconds and the minimum interval to
700 seconds.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] ipv6 nd ra interval 1000 700
Related commands
ipv6 nd ra router-lifetime

ipv6 nd ra no-advlinkmtu

Use ipv6 nd ra no-advlinkmtu to turn off the MTU option in RA messages.
Use undo ipv6 nd ra no-advlinkmtu to restore the default.
Syntax
ipv6 nd ra no-advlinkmtu
undo ipv6 nd ra no-advlinkmtu
Default
RA messages contain the MTU option.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
The MTU option in the RA messages specifies the link MTU to make sure that all nodes on the link use the
same MTU.
Examples
# Turn off the MTU option in RA messages on GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] ipv6 nd ra no-advlinkmtu
356