HP MSR Series Command Reference Manual page 170

Interfaces enabled with static NAT:
Totally 2 interfaces enabled with static NAT.
Interface: GigabitEthernet2/0/2
Config status: Active
Interface: GigabitEthernet2/0/3
Config status: Active
NAT DNS mappings:
Totally 2 NAT DNS mappings.
Domain name : www.server.com
Global IP : 6.6.6.6
Global port : 23
Protocol : TCP(6)
Config status: Active
Domain name : www.service.com
Global IP : ---
Global port : 12
Protocol : TCP(6)
Config status: Inactive
Reasons for inactive status:
The following items don't exist or aren't effective: interface IP address.
NAT logging:
Log enable
Flow-begin
Flow-end
Flow-active
Port-block-assign
Port-block-withdraw : Disabled
Alarm
NAT hairpinning:
Totally 2 interfaces enabled with NAT hairpinning.
Interface: GigabitEthernet2/0/1
Config status: Active
Interface: GigabitEthernet2/0/2
Config status: Active
NAT mapping behavior:
Mapping mode : Endpoint-Independent
ACL : 2050
Config status: Active
NAT ALG:
DNS : Enabled
: Enabled(ACL 2000)
: Disabled
: Disabled
: Enabled(10 minutes)
: Disabled
: Disabled
156