Sip-Server - HP MSR Series Command Reference Manual

Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name. The MPLS L3VPN
instance name is a case-sensitive string of 1 to 31 characters. To clear DHCPv6 server statistics for the
public network, do not specify this option.
Examples
# Clear DHCPv6 server statistics.
<Sysname> reset ipv6 dhcp server statistics
Related commands
display ipv6 dhcp server statistics

sip-server

Use sip-server to specify the IPv6 address or domain name of a SIP server in the DHCPv6 address pool.
Use undo sip-server to remove a SIP server.
Syntax
sip-server { address ipv6-address | domain-name domain-name }
undo sip-server { address ipv6-address | domain-name domain-name }
Default
No SIP server address or domain name is specified.
Views
DHCPv6 address pool view, DHCPv6 option group view
Predefined user roles
network-admin
Parameters
address ipv6-address: Specifies the IPv6 address of a SIP server.
domain-name domain-name: Specifies the domain name of a SIP server, a case-insensitive string of 1 to
50 characters.
Usage guidelines
You can specify up to eight SIP server addresses and eight SIP server domain names in an address pool.
A SIP server that is specified earlier has a higher preference.
Examples
# Specify the SIP server address 2:2::4 in DHCPv6 address pool 1.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] sip-server address 2:2::4
412