Ipv6 Dhcp Snooping Option Remote-Id Enable - HP MSR Series Command Reference Manual
Layer 3 ip services
command reference (v7)
Hide thumbs
Also See for MSR Series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Parameters
vlan vlan-id: Specifies the VLAN where the DHCPv6 clients resides.
interface-id: Specifies a string of 1 to 128 characters as the interface ID.
Examples
# Specify company001 as the interface ID.
<Sysname> system-view
[Sysname] ipv6 dhcp snooping enable
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] ipv6 dhcp snooping option interface-id enable
[Sysname-GigabitEthernet2/0/1] ipv6 dhcp snooping option interface-id string company001
Related commands
ipv6 dhcp snooping enable
•
•
ipv6 dhcp snooping option interface-id enable
ipv6 dhcp snooping option remote-id enable
Use ipv6 dhcp snooping option remote-id enable to enable support for the remote-ID option (also called
Option 37).
Use undo ipv6 dhcp snooping option remote-id enable to restore the default.
Syntax
ipv6 dhcp snooping option remote-id enable
undo ipv6 dhcp snooping option remote-id enable
Default
Option 37 is not supported.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only when DHCPv6 snooping is globally enabled.
Examples
# Enable support for Option 37.
<Sysname> system-view
[Sysname] ipv6 dhcp snooping enable
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] ipv6 dhcp snooping option remote-id enable
Related commands
ipv6 dhcp snooping enable
•
ipv6 dhcp snooping option remote-id string
•
442
Advertisement
Table of Contents
