Vam Server Advpn-Domain; Vam Server Enable - HP MSR Series Command Reference Manual

Examples
# Configure a spoke private IPv4 address range in IPv4 network address format as 1.1.1.0/24 for hub
group 1.
<Sysname> system-view
[Sysname] vam server advpn-domain 1
[Sysname-vam-server-domain-1] hub-group 1
[Sysname-vam-server-domain-1-hub-group-1] spoke private-address network 1.1.1.0
255.255.255.0

vam server advpn-domain

Use vam server advpn-domain to create an ADVPN domain and enter its view. If the specified ADVPN
domain already exists, this command opens the ADVPN domain view.
Use undo vam server advpn-domain to remove an ADVPN domain.
Syntax
vam server advpn-domain domain-name [ id domain-id ]
undo vam server advpn-domain domain-name
Default
No ADVPN domain is configured.
Views
System view
Predefined user roles
network-admin
Parameters
domain-name: Specifies an ADVPN domain by its name, a case-insensitive string of 1 to 31 characters
that can include only letters, digits, and dots (.).
id domain-id: Specifies the ID of an ADVPN domain, in the range of 1 to 65535.
Usage guidelines
An ADVPN domain ID is required only when you create the ADVPN domain.
You must specify a unique domain ID for an ADVPN domain.
Examples
# Create ADVPN domain 1 with domain ID 1, and enter its view.
<Sysname> system-view
[Sysname] vam server advpn-domain 1 id 1
[Sysname-vam-server-domain-1]

vam server enable

Use vam server enable to enable the VAM server for one or all ADVPN domains.
Use undo vam server enable to disable the VAM server for one or all ADVPN domains.
504