Display Dhcp Relay Information - HP MSR Series Command Reference Manual

Related commands
dhcp relay client-information record
•
reset dhcp relay client-information
•

display dhcp relay information

Use display dhcp relay information to display Option 82 configuration information for the DHCP relay
agent.
Syntax
display dhcp relay information [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays Option 82 configuration information for the specified
interface. If you do not specify an interface, this command displays Option 82 configuration information
about all interfaces.
Examples
# Display Option 82 configuration information for all interfaces.
<Sysname> display dhcp relay information
Interface: Vlan-interface100
Status: Enable
Strategy: Replace
Circuit ID Pattern: Verbose
Remote ID Pattern: Sysname
Circuit ID format-type: Undefined
Remote ID format-type: ASCII
Node identifier: aabbcc
Interface: Vlan-interface200
Status: Enable
Strategy: Replace
Circuit ID Pattern: User Defined
Remote ID Pattern: User Defined
Circuit ID format-type: ASCII
Remote ID format-type: ASCII
User defined:
Circuit ID: vlan100
Remote ID: device001
95