Shortcut Interest - HP MSR Series Command Reference Manual

Default
The VAM server is disabled for an ADVPN domain.
Views
ADVPN domain view
Predefined user roles
network-admin
Usage guidelines
You can also execute the vam server enable command in system view to enable the VAM server for one
or all ADVPN domains.
Examples
# Enable the VAM server for ADVPN domain 1.
<Sysname> system-view
[Sysname] vam server advpn-domain 1
[Sysname-vam-server-domain-1] server enable
Related commands
vam server enable

shortcut interest

Use shortcut interest to specify an ACL to control establishing IPv4 spoke-to-spoke tunnels.
Use undo shortcut interest to restore the default.
Syntax
shortcut interest { acl { acl-number | name acl-name } all }
undo shortcut interest
Default
Spokes are not allowed to establish direct tunnels.
Views
Hub group view
Predefined user roles
network-admin
Parameters
acl: Specifies an ACL to control establishing IPv4 spoke-to-spoke tunnels.
acl-number: Specifies an IPv4 ACL by its number:
2000 to 2999 for IPv4 basic ACLs.
•
3000 to 3999 for IPv4 advanced ACLs.
•
name acl-name: Specifies an ACL by its name, a case-insensitive string of 1 to 63 characters. It must start
with an English letter and to avoid confusion, it cannot be all.
all: Allows establishing IPv4 spoke-to-spoke tunnels between all spokes in different hub groups.
500