HP MSR Series Command Reference Manual page 339

Field
Inpcb flags
Inpcb extflag
Inpcb vflag
Description
Flags in the Internet PCB:
•
INP_RECVOPTS—Receives IPv6 options.
•
INP_RECVRETOPTS—Receives replied IPv6 options.
•
INP_RECVDSTADDR—Receives destination IPv6 address.
•
INP_HDRINCL—Provides the entire IPv6 header.
•
INP_REUSEADDR—Reuses the IPv6 address.
•
INP_REUSEPORT—Reuses the port number.
•
INP_ANONPORT—Port number not specified.
•
INP_PROTOCOL_PACKET—Identifies a protocol packet.
•
INP_RCVVLANID—Receives the VLAN ID of the packet. Only UDP and
RawIP support this flag.
•
IN6P_IPV6_V6ONLY—Only supports IPv6 protocol stack.
•
IN6P_PKTINFO—Receives the source IPv6 address and input interface of
the packet.
•
IN6P_HOPLIMIT—Receives the hop limit.
•
IN6P_HOPOPTS—Receives the hop-by-hop options extension header.
•
IN6P_DSTOPTS—Receives the destination options extension header.
•
IN6P_RTHDR—Receives the routing extension header.
•
IN6P_RTHDRDSTOPTS—Receives the destination options extension header
preceding the routing extension header.
•
IN6P_TCLASS—Receives the traffic class of the packet.
•
IN6P_AUTOFLOWLABEL—Attaches a flow label automatically.
•
IN6P_RFC2292—Uses the API specified in RFC 2292.
•
IN6P_MTU—Discovers differences in the MTU size of every link along a
given data path. TCP does not support this flag.
•
INP_RCVMACADDR—Receives the MAC address of the frame.
•
INP_USEICMPSRC—Uses the specified IPv6 address as the source IPv6
address for outgoing ICMP packets.
•
INP_SYNCPCB—Waits until Internet PCB is synchronized.
•
N/A—None of the above flags.
Extension flags in the Internet PCB:
•
INP_EXTRCVPVCIDX—Records the PVC index of the received packet.
•
INP_RCVPWID—Records the PW ID of the received packet.
•
N/A—None of the above flags.
IP version flag in the Internet PCB:
•
INP_IPV4—IPv4 protocol.
•
INP_IPV6—IPv6 protocol.
•
INP_IPV6PROTO—Creates an Internet PCB based on IPv6 protocol.
•
INP_TIMEWAIT—In TIMEWAIT state.
•
INP_ONESBCAST—Sends broadcast packets.
•
INP_DROPPED—Protocol dropped flag.
•
INP_SOCKREF—Strong socket reference.
•
INP_DONTBLOCK—Do not block synchronization of the Internet PCB.
•
N/A—None of the above flags.
325