Dhcp Relay Information Strategy - HP MSR Series Command Reference Manual

Use undo dhcp relay information remote-id to restore the default.
Syntax
dhcp relay information remote-id { normal [ format { ascii | hex } ] | string remote-id | sysname }
undo dhcp relay information remote-id
Default
The padding mode is normal and the padding format is hex.
Views
Interface view
Predefined user roles
network-admin
Parameters
normal: Specifies the normal mode in which the padding content is the MAC address of the receiving
interface.
format: Sets the padding format for the Remote ID sub-option. The default padding format is hex.
ascii: Sets the padding format to ASCII.
hex: Sets the padding format to Hex.
string remote-id: Specifies the string mode that uses a case-sensitive string of 1 to 63 characters as the
content of the Remote ID sub-option.
sysname: Specifies the sysname mode that uses the device name as the content of the Remote ID
sub-option. You can set the device name by using the sysname command.
Usage guidelines
The padding format for the specified character string (string) or the device name (sysname) is always
ASCII. The padding format for the normal mode is determined by the command.
If you use the command multiple times, the most recent configuration takes effect.
Examples
# Specify the padding content for the Remote ID sub-option of Option 82 as device001.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] dhcp relay information enable
[Sysname-GigabitEthernet2/0/1] dhcp relay information strategy replace
[Sysname-GigabitEthernet2/0/1] dhcp relay information remote-id string device001
Related commands
dhcp relay information enable
•
•

dhcp relay information strategy

display dhcp relay information
•
dhcp relay information strategy
Use dhcp relay information strategy to configure the strategy for the DHCP relay agent to handle
messages containing Option 82.
90