Display Advpn Session - HP MSR Series Command Reference Manual

Input : 2201 packets, 2198 data packets, 3 control packets
Output: 2169 packets, 216 data packets, 1 control packets
Table 111 Command output
Field
Interface
Client name
Link protocol
Number of sessions
Private address
Public address
ADVPN port
SA's SPI
Session type
State
Holding time
Input
Output
Related commands
reset advpn ipv6 session

display advpn session

Use display advpn session to display IPv4 ADVPN tunnel information.
2191 multicasts, 0 errors
2163 multicasts, 0 errors
Description
ADVPN tunnel interface.
Name of the VAM client bound to the tunnel interface.
Link layer protocol for the ADVPN tunnel:
•
UDP.
•
GRE.
•
IPsec-UDP.
•
IPsec-GRE.
Number of ADVPN tunnels established on the tunnel interface.
Private address of the ADVPN tunnel peer.
Public address of the ADVPN tunnel peer.
UDP port number for the ADVPN tunnel when the link layer protocol is UDP or
IPsec-UDP.
SPIs for the inbound and outbound SAs when link layer protocol is IPsec-UDP or
IPsec-GRE.
ADVPN tunnel type:
•
Hub-Hub—Both the local end and the remote end are hubs.
•
Hub-Spoke—The local end is a hub and the remote end is a spoke.
•
Spoke-Hub—The local end is a spoke and the remote end is a hub.
•
Spoke-Spoke—Both the local end and the remote end are spokes.
ADVPN tunnel state:
•
Success—The tunnel has been already established.
•
Establishing—The tunnel is being established.
•
Dumb—The tunnel failed to be established and is now quiet.
Duration time since the tunnel stayed in the current state, in the format of xH yM zS.
Statistics for incoming packets, including the numbers of all packets, data packets,
control packets, multicast packets, and erroneous packets.
Statistics for outgoing packets, including the numbers of all packets, data packets,
control packets, multicast packets, and erroneous packets.
534