Display Waas Status - HP MSR Series Command Reference Manual

Field
Space saved
Average Latency
Related commands
reset waas statistics dre

display waas status

Use display waas status to display the global WAAS status.
Syntax
display waas status
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the global WAAS status.
<Sysname> display waas status
WAAS Version: 1.0
Local ID: 02e0-011a-0000
DRE Status: Enabled
LZ Status: Enabled
BlackList Status: Enabled
Total Active connections: 0
Total data storage size: 19426304 bytes
Total index number: 75884
Blacklist Hold-time: 5 minutes
Interfaces
Serial2/0/1
Serial2/0/2
Serial2/0/5
Total policy interfaces: 3
Table 118 Command output
Field
Local ID
Description
•
Compression ratio: (1–Bytes out/Bytes in) x 100.
•
Decompression ratio: (1–Bytes in/Bytes out) x 100.
Average latency in milliseconds for the last compression or
decompression. When multiple CPUs are available on a card, the
average latency is the latency time divided by the number of CPUs.
Applied policy
waas_global
waas_default
waas_global
Description
Bridge MAC address of the local device, which uniquely identifies the local device.
556