HP MSR Series Command Reference Manual page 191

NAT inbound information:
Totally 2 NAT inbound rules.
Interface: GigabitEthernet2/0/2
ACL: 2038
NO-PAT: Y
VPN instance: vpn1
Config status: Active
Global flow-table status: Active
Interface: GigabitEthernet2/0/3
ACL: 2037
NO-PAT: Y
VPN instance: vpn2
Config status: Inactive
Reasons for inactive status:
The following items don't exist or aren't effective: local VPN, and ACL.
Global flow-table status: Active
# (Distributed devices in IRF mode.) Display information about inbound dynamic NAT.
<Sysname> display nat inbound
NAT inbound information:
Totally 2 NAT inbound rules.
Interface: GigabitEthernet1/2/0/2
ACL: 2038
NO-PAT: Y
VPN instance: vpn1
Config status: Active
Global flow-table status: Active
Interface: GigabitEthernet1/2/0/3
ACL: 2037
NO-PAT: Y
VPN instance: vpn2
Config status: Inactive
Reasons for inactive status:
The following items don't exist or aren't effective: local VPN, and ACL.
Global flow-table status: Active
Table 34 Command output
Field
NAT inbound information
Interface
ACL
Address group
Add route
Address group: 2
Reversible: N
Address group: 1
Reversible: N
Address group: 2
Reversible: N
Address group: 1
Reversible: N
Description
Information about inbound dynamic NAT.
Interface where inbound dynamic NAT is configured.
ACL number or name.
NAT address group used by inbound dynamic NAT rule.
Whether to add a route when a packet matches the inbound dynamic NAT
rule.
177
Add route: Y
Add route: Y
Add route: Y
Add route: Y