Methods Of Printing - Flashforge Inventor User Manual

7.2 Methods of printing

Printing from USB
1. Connect Inventor to the computer using the included USB 2.0 cable.
2. Turn on the Inventor. Make sure the build plate is leveled and filament is loaded
into the left extruder.
3. Select [Print] from menu bar, then select [Connect].
4. Click on [Rescan], then [Connect].
5. Now the printer is connected with FlashPrint. A status box at the lower right corner
will show the temperature of both extruders and the platform.
6. Click [Print] icon, and a printing options screen will appear. Make sure that
"ABS" is selected under
Options]
icon. Check the box
7. Save the file at any location, and the object will start slicing
8. After the object is done slicing, it will automatically upload the gcode to the
Inventor.
9. After the gcode is done uploading, the printer will go into a preheat phase. The
Inventor will begin printing once it has finished preheating.
Printing from SD Card
1. Click [Print], and a printing options screen will show up.
2. Make sure that the
Inventor User Guide | www.FlashForge.com
Material Left. Advanced settings can be set under
"Print When Slice
"Material Left" is selected as "ABS." Advanced settings can be
About:
It displays the basic information about
the device.
Done" and click [OK].
58
[More
400-699- 1063