Flashforge Inventor User Manual page 40

④ Supports: When print with model contains part hanging in the air or top-heavy,
support is necessary. Click
⑤ Raft: This function will help the model to stick well on the platform.
⑥ Wall: During dual color printing, this function will help to clear the leaking
filament of another extruder.
⑦ Brim: Expand the outline of model's bottom layers to a Brim which helps anchor
the edges of the model to the plate to avoid warping.
⑧ Resolution ： You have three resolution solution (with default setting)to choose
from, high resolution is corresponding with slow printing speed, opposite for the low
resolution. For PLA printing, an extra solution "Hyper" is available.
⑨ More options: Click
temperature. Different resolution solution is corresponding to different defaults, click
[Restore Defaults]
●Layer
a. Layer: Layer thickness of the printing model. With a small number, the
surface of the model will be smoother.
b. First Layer Height: This is the first layer of the model, which will affect the
sticking performance between the model and platform. Maximum is 0.4mm, usually
the default is ok.
c. Shell: Contains of the outside shell number, capping layer number (under vase
pattern, top solid layer setting is invalid.)
● Perimeter Shells: Maximum is 10
a. Top Solid Layer: Maximum is 30, minimum is 1.
b. Bottom Solid Layer: Maximum is 30, minimum is 1.
● Infill
a. Fill Density means fill rate.
Inventor User Guide | www.FlashForge.com
[Supports] to create support part for the printing.
[More options]
to back to default setting.
to set for layer, shell, infill, speed and
40
400-699- 1063