Methods Of Printing - Flashforge Inventor User Manual

7.2 Methods of printing

Printing from USB
1. Connect Inventor to the computer using the included USB 2.0 cable.
2. Turn on the Inventor. Make sure the build plate is leveled and filament is loaded to
the left extruder.
3. Select [ Print ] from menu bar, then select
4. Click on [ Rescan
Inventor User Guide | www.flashforge.com
], then [ Connect ].
Pulley:
To select the equipped pulley type.
Status:
It displays the real-time status of the
extruder temperature, the platform
temperature and the internal
temperature.
About:
It displays the basic information about
the device.
[ Connect ].
60
0086‐ 0579‐82273989