Methods Of Printing - Flashforge Dreamer Desktop 3D Printer User Manual

____________________________________________________________________________________________

3.3 Methods of printing

Printing from USB
1. Connect Dreamer to the computer using the included USB 2.0 cable.
2. Turn on the Dreamer. Make sure the build plate is leveled and filament
is loaded to the left extruder. Please refer to page 22 for leveling the
build plate and pages 19 and 21 for loading and unloading filament.
3. Select [ Print ]
4. Click on [ Rescan
5. Now the printer is connected with FlashPrint. A status box at the lower
right corner will show the temperature of both extruders and the
platform.
6. Press [ Print ]
sure that "ABS"
can be set under
Slice Done" and click
7. Save the file at any location, and the object will start slicing
8. After the object is done slicing, it will automatically upload the gcode
to the Dreamer.
9. After the gcode is done uploading, the printer will go into a preheat
phase . The Dreamer will begin printing once it has finished
preheating.
Dreamer User Guide |
from menu bar, then select
], then [ Connect
icon, and a printing options screen will appear. Make
is selected under
[ More Options ]
[ OK ].
www.ff3dp.com
[ Connect
].
Material Left. Advanced settings
icon. Check the box
].
"Print When
44