Exploring Flashprint - Flashforge Inventor User Manual

6.2 Exploring FlashPrint

6. 2.1 Machine Type Selection
Notice! After starting FlashPrint, you need to select the target machine type first.
When you start FlashPrint, a dialog box will pop up. Just need to select FlashForge
Inventor in the machine type list and click [OK]. You can also change the machine
type via clicking [Print]--[Machine type]. Please see graphic 6-2:
6-2
6.2.2 FlashPrint Menus
6-3
Inventor User Guide | www.FlashForge.com 400-699- 1063
28