Flashforge Inventor User Manual page 46

Method 2： Connect Via WiFi
1. Turn on Inventor.
2. Turn on Wi-Fi on the Inventor. Tap [Tool]-[Setting]-[WiFi]-[ WiFi ON].
3. A connection called"Inventor1" can be found on the your computer available
networks list. Connect your computer to this network.
6-20
4. Open your Internet browser in your computer. Type in "10.10.100.254" and hit
[Enter]
on your keyboard. Enter the username and password to login. The default
username and password are both "admin." The control panel will appear after a
successful login.
6-21
5. Click on [WiFi Set] and choose"AP+STA mode" in WiFi Model Select and save it.
6.You can set the network name and password of the hotspot in AP mode. If you don't
want to set the password, select "None". And then save it.
7. Select a working network, enter the corresponding name and password and save in
STA mode.
Inventor User Guide | www.FlashForge.com 400-699- 1063
46