Flashforge Inventor User Manual page 50

below curve of temperature form will start to change, different color correspond
different parts' temperatures
② Update Firmware
Every time when you start FlashPrint, it will automatically detect and download the
up-to-date firmware. If any update is available, a dialog box will pop up for reminding
the users to update.
Step 1: Click [Tools]--[Update firmware]. It needs to cut off connection before
updating firmware. If software and printer are already in connection, it reminds you
[Yes]
cutting off the connection, choose and go on to the next step.
Step 2: Choose corresponding printer type and firmware version and click [OK] in
the firmware updating box. After confirming the printer is in free state, the software
will automatically update the firmware.
6-23
Step 3：Reboot you Inventor and wait for 4-5 seconds, then you can see the update
process bar. When the update finishes, it will go back to the main interface.
Step 4：Tap [Tool]--[About] to check whether the updated version is right.
Inventor User Guide | www.FlashForge.com 400-699- 1063
50