Flashforge Inventor User Manual page 56

Tap [Tool] to enter tool options.
Filament: To load/unload the filament.
Level: To adjust the build plate.
Home: To make the X, Y and Z axes
back to the zero point.
Manual:
To manually adjust the
positions of X, Y and Z axes.
Setting: To implement relevant function
setups.
Status: The check the real-time status
of the printer.
About: Information about the printer.
Back
Manual adjustment
Y+: The extruder moves to the zero
point, that is, the back of the machine
Y-: The extruder moves to the direction
opposite to the Y+.
X+: The extruder moves to the zero
points, that is, to the right direction
X-: The extruder moves to the direction
opposite to the X+.
Z+: The build plate elevates.
Z-: The build plate descends.
Back
Tap [Setting] to enter the setting
interface
Language: To set the display language
Fan On: To turn on/off the fan
WiFi: To turn on/off the WiFi
Factory Reset: Restore factory defaults
Update: To update the firmware
Pulley: To choose the pulley type
Camera: To turn on/off the camera
Resume Print Off: To turn on/off
resume print
Back
Inventor User Guide | www.FlashForge.com 400-699- 1063
56