Chapter 6: About Software; Software Installation - Flashforge Inventor User Manual

Chapter 6: About Software

This chapter talks about the basic function of FlashPrint. For more information about
advanced function, you can browse our website www.FlashForge.com.

6.1 Software Installation

6.1.1 Software Acquisition
Method 1: To get the installation package from the SD Card in the toolkit.
Method 2: Open the link below to download the installation package:
http://www.FlashForge.com
Support---Downloads---FlashPrint---Choose the Software Version---Download
6.1.2 Software Installation and Start-up
1. Decompress the zipped file or start the installation program, and then install the
software according to the direction.
2. Click the software icon to start the software with the start menu shortcut.(See 6-1)
6-1
Inventor User Guide | www.FlashForge.com 400-699- 1063
27