Flashforge Inventor User Manual page 3

Preface
Note: Each device must be tested before leaving factory. If there are some residues in
extruder or some tiny scratches on the build tape, it is normal and won't affect the
printing quality.
On the completion of this User Guide, thanks all FlashForge engineers and the
FlashForge 3D printer users for their unremitting efforts and sincere assistance.
The FlashForge Inventor User Guide is designed for the Inventor users to start their
printing journey with FlashForge Inventor. Even if you are familiar with earlier
FlashForge machines or 3D printing technology, we still recommend that you read
through this guide, as there is lots of important information about the Inventor for you
to get a better 3D experience.
For a better and more successful printing experience, you can refer to the following
materials:
(1) Quick Start Guide
Users will find the Quick Start Guide together with the printer accessories. The Quick
Start Guide will help you start your print journey as soon as possible.
(2) Official FlashForge Website:
http://www.FlashForge.com
The official FlashForge website contains the up-to-date information concerning
FlashForge software, firmware, device maintenance and so on. Users are also able to
get the contact information from there.
Inventor User Guide | www.FlashForge.com 400-699- 1063
3