Flashforge Inventor User Manual page 44

Method 1: Click [Edit]--[Undo].
Method 2: Press the shortcut Ctrl+Z.
② Redo
Allows users to redo the most recent edit you have undone to your model file by the
following two methods
Method 1: Click [Edit]--[Redo]
Method 2: Press the shortcut Ctrl+Y.
③Empty Undo-stack
To clean up the recorded operating steps so as to release the memory.
④ Select All
By the following two methods, you could select all models in the scene. (When
models are too small to be seen or out of viewing scope, please click
[Scale]
buttons to adjust the model.)
Method 1: Click
[Edit]--[Select
Method 2: Press the shortcut Ctrl+A.
⑤ Duplicate
Select the object and duplicate the object through the following two methods:
Method 1: Click
[Edit]--[Duplicate]
Method 2: Press the shortcut
⑥ Delete
Select the object and delete the object through the following two methods:
Method 1: Click [Edit]--[Delete]
Method 2: Press the shortcut
⑦ Auto Layout All
[Edit]--[Auto Layout All]
Click
models will be placed automatically as automatic placement rule.
⑧ Repair Models
[Edit]--[Repair Models]
Click
Inventor User Guide | www.FlashForge.com
All].
Ctrl+D
Delete
after loading one or more than one models, all
to repair models.
44
[Center] and
400-699- 1063