4.3 Printing Methods
4.3.1 Printing via USB
The printer supports printing via USB. Save the sliced file to a USB flash drive, insert it into the
printer, and select the corresponding file to start printing.
4.3.2 Printing via Wi-Fi transfer
After successfully connecting the printer to the network, open FlashPrint 5. After finishing slicing,
click [Print] in the menu and select the Adventurer 5M Pro as the machine to connect to. You can
connect it to the printer by entering the IP address or by automatic scanning.
The printer and the computer must be
Note
connected to the same network.
23