Software Configuration; Flashprint Installation; Exploring Flashprint - Flashforge FINDER Start Up And Instruction Manual

————————————————————————————————————————————
5. Repeat steps 2 through 4 above to complete second and third points leveling and then Tap
[Finish] to exit.

Software Configuration

FlashPrint Installation

Where to get FlashPrint installer
Method 1: To get the installation package from the provided USB stick come with the Finder.
Method 2: Contact Mr. Tang at 597891915@qq.com for download link of latest FlashPrint.
1. Decompress the zip and complete installation according to the prompted instructions step by
step.
2. Start the software with the start menu shortcut or by double clicking the software icon.

Exploring FlashPrint

Selecting the machine type
After starting Flashprint, you need to select the target machine type first.
When you start Flashprint, a dialog box will pop up. Just need to select FlashForge Finder in the
machine type list and click [OK]. You can also change the machine type via clicking
[Print]--[Machine type]. Please see graphic below:
7