Software Installation; Software Acquisition; Software Installation And Start-Up; Chapter 6: About Software - Flashforge Creator3 User Manual

Chapter 6: About Software

This chapter talks about the basic function of FlashPrint. For more information about
advanced function, you can browse our website www.FlashForge.com.

6.1 Software Installation

6.1.1 Software Acquisition

Method 1: To get the installation package from the USB stick in the toolkit.
Method 2: Open the link below to download the installation package:
http://www.flashforge.com/support-center/flashprint-support/
Steps:
SupportCenter
Support--- ---FlashPrint---Choose the software version ---Download

6.1.2 Software Installation and Start-up

1. Decompress the zipped file or start the installation program, and then install the
software according to the direction.
2. Start the software with the start menu shortcut or by clicking the software icon.
6-1

6.2 Exploring FlashPrint

6.2.1 Machine Type Selection
! After starting FlashPrint, you need to select the target machine type first.
Creator3 User Guide | www.flashforge.com 400-699-1063
47