Table 27: Port Id Subtype - Edge-Core ES3510MA-DC Management Manual

| Basic Administration Protocols
C 15
HAPTER
Link Layer Discovery Protocol
P
ARAMETERS
These parameters are displayed:
Port
Local Port – The local port to which a remote LLDP-capable device is
◆
attached.
Chassis ID – An octet string indicating the specific identifier for the
◆
particular chassis in this system.
Port ID – A string that contains the specific identifier for the port from
◆
which this LLDPDU was transmitted.
System Name – A string that indicates the system's administratively
◆
assigned name.
Port Details
Local Port – The local port to which a remote LLDP-capable device is
◆
attached.
Chassis Type – Identifies the chassis containing the IEEE 802 LAN
◆
entity associated with the transmitting LLDP agent. There are several
ways in which a chassis may be identified and a chassis ID subtype is
used to indicate the type of component being referenced by the chassis
ID field. (See Table 25, "Chassis ID Subtype," on page
Chassis ID – An octet string indicating the specific identifier for the
◆
particular chassis in this system.
System Name – A string that indicates the system's assigned name.
◆
◆ System Description – A textual description of the network entity.
Port Type – Indicates the basis for the identifier that is listed in the
◆
Port ID field.

Table 27: Port ID Subtype

ID Basis
Interface alias
Chassis component
Port component
MAC address
Network address
Interface name
Agent circuit ID
Locally assigned
– 376 –
Reference
IfAlias (IETF RFC 2863)
EntPhysicalAlias when entPhysClass has a value of 'chassis(3)'
(IETF RFC 2737)
EntPhysicalAlias when entPhysicalClass has a value 'port(10)' or
'backplane(4)' (IETF RFC 2737)
MAC address (IEEE Std 802-2001)
networkAddress
ifName (IETF RFC 2863)
agent circuit ID (IETF RFC 3046)
locally assigned
373.)