Edge-Core ES3510MA-DC Management Manual page 646

| Authentication Commands
C 24
HAPTER
802.1X Port Authentication
Current Identifier– The integer (0-255) used by the Authenticator to
■
identify the current authentication session.
Backend State Machine
◆
State – Current state (including request, response, success, fail,
■
timeout, idle, initialize).
Request Count– Number of EAP Request packets sent to the
■
Supplicant without receiving a response.
Identifier (Server)– Identifier carried in the most recent EAP
■
Success, Failure or Request packet received from the Authentication
Server.
Reauthentication State Machine
◆
State – Current state (including initialize, reauthenticate).
E
XAMPLE
Console#show dot1x
Global 802.1X Parameters
System Auth Control
Authenticator Parameters:
EAPOL Pass Through
Supplicant Parameters:
Identity Profile Username : steve
802.1X Port Summary
Port Type
-------- ------------- -------------- ------------------ ----------
Eth 1/ 1 Disabled
Eth 1/ 2 Disabled
.
.
.
Eth 1/11 Disabled
Eth 1/10 Enabled
802.1X Port Details
802.1X Authenticator is enabled on port 1/1
802.1X Supplicant is disabled on port 1/1
.
.
.
802.1X Authenticator is enabled on port 10
Reauthentication : Enabled
Reauth Period : 3600
Quiet Period : 60
TX Period : 30
Supplicant Timeout : 30
Server Timeout : 10
Reauth Max Retries : 2
Max Request : 2
Operation Mode : Multi-host
Port Control : Auto
Intrusion Action : Block traffic
Supplicant : 00-e0-29-94-34-65
– 646 –
: Enabled
: Disabled
Operation Mode Control Mode
Single-Host Force-Authorized
Single-Host Force-Authorized
Single-Host Force-Authorized
Single-Host Auto
Authorized
Yes
Yes
Yes
Yes