Vlan Trunking - Edge-Core ES3510MA-DC Management Manual

| Interface Configuration
C 5
HAPTER

VLAN Trunking

VLAN T
RUNKING
W I
EB NTERFACE
To show the members of the traffic segmentation group:
Click Interface, Traffic Segmentation.
1.
Select Configure Session from the Step list.
2.
Select Show from the Action list.
3.
Figure 55: Showing Traffic Segmentation Members
Use the Interface > VLAN Trunking page to allow unknown VLAN groups to
pass through the specified interface.
CLI R
EFERENCES
"vlan-trunking" on page 838
◆
C U
OMMAND SAGE
Use this feature to configure a tunnel across one or more intermediate
◆
switches which pass traffic for VLAN groups to which they do not
belong.
The following figure shows VLANs 1 and 2 configured on switches A and
B, with VLAN trunking being used to pass traffic for these VLAN groups
across switches C, D and E.
Figure 56: Configuring VLAN Trunking
Without VLAN trunking, you would have to configure VLANs 1 and 2 on
all intermediate switches – C, D and E; otherwise these switches would
drop any frames with unknown VLAN group tags. However, by enabling
– 162 –