| Security Measures
C
14
HAPTER
Network Access (MAC Address Authentication)
C
U
OMMAND
SAGE
◆
Specified MAC addresses are exempt from authentication.
Up to 65 filter tables can be defined.
◆
There is no limitation on the number of entries used in a filter table.
◆
P
ARAMETERS
These parameters are displayed:
◆
Filter ID – Adds a filter rule for the specified filter.
MAC Address – The filter rule will check ingress packets against the
◆
entered MAC address or range of MAC addresses (as defined by the
MAC Address Mask).
MAC Address Mask – The filter rule will check for the range of MAC
◆
addresses defined by the MAC bit mask. If you omit the mask, the
system will assign the default mask of an exact match.
(Range: 000000000000 - FFFFFFFFFFFF; Default: FFFFFFFFFFFF)
W
I
EB
NTERFACE
To add a MAC address filter for MAC authentication:
Click Security, Network Access.
1.
Select Configure MAC Filter from the Step list.
2.
Select Add from the Action list.
3.
Enter a filter ID, MAC address, and optional mask.
4.
Click Apply.
5.
Figure 159: Configuring a MAC Address Filter for Network Access
To show the MAC address filter table for MAC authentication:
Click Security, Network Access.
1.
Select Configure MAC Filter from the Step list.
2.
– 294 –