Figure 140: Showing AAA Server Groups
Use the Security > AAA > Accounting page to enable accounting of
C
AAA
ONFIGURING
requested services for billing or security purposes, and also to display the
A
CCOUNTING
configured accounting methods, the methods applied to specific interfaces,
and basic accounting information recorded for user sessions.
CLI R
◆
C
AAA authentication through a RADIUS or TACACS+ server must be enabled
before accounting is enabled.
P
ARAMETERS
These parameters are displayed:
Configure Global
◆
Configure Method
◆
◆
EFERENCES
"AAA" on page 609
U
OMMAND
SAGE
Periodic Update - Specifies the interval at which the local accounting
service updates information for all users on the system to the
accounting server. (Range: 0-2147483647 minutes; where 0 means
disabled)
Accounting Type – Specifies the service as:
802.1X – Accounting for end users.
■
Exec – Administrative accounting for local console, Telnet, or SSH
■
connections.
Method Name – Specifies an accounting method for service requests.
The "default" methods are used for a requested service if no other
methods have been defined. (Range: 1-255 characters)
Note that the method name is only used to describe the accounting
method configured on the specified RADIUS or TACACS+ servers. No
information is sent to the servers about the method to use.
– 275 –
| Security Measures
C
14
HAPTER
AAA Authorization and Accounting