Table 140: Show Ethernet Cfm Maintenance-Points Remote Detail - Display - Edge-Core ES3510MA-DC Management Manual

ma-name – Maintenance association name. (Range: 1-45
alphanumeric characters)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
Use the mpid keyword with this command to display information about a
specific maintenance point, or use the mac keyword to display information
about all maintenance points that have the specified MAC address.
E
XAMPLE
This example shows detailed information about the remote MEP designated
by MPID 2.
Console#show ethernet cfm maintenance-points remote detail mpid 2
MAC Address
Domain/Level
MA Name
Primary VLAN
MPID
Incoming Port
CC Lifetime
Age of Last CC Message : 2 seconds
Frame Loss
CC Packet Statistics
Port State
Interface State
Crosscheck Status
Console#

Table 140: show ethernet cfm maintenance-points remote detail - display

Field Description
MAC Address MAC address of the remote maintenance point. (If a CCM for the
specified remote MEP has never been received or the remote MEP
record times out, the address will be set to the initial value of all Fs.)
Domain/Level Maintenance domain and level of the remote maintenance point
MA Name Maintenance association to which this remote MEP belongs
Primary VLAN VLAN to which this MEP belongs
MPID MEP identifier
Incoming Port Port to which this remote MEP is attached.
CC Lifetime Length of time to hold messages about this MEP in the CCM database
Age of Last CC Message Length of time the last CCM message about this MEP has been in the
CCM database
Frame Loss Percentage of transmitted frames lost
CC Packet Statistics The number of CCM packets received successfully and those with
(received/error) errors
– 979 –
C
: 00-0D-54-FC-A2-73
: voip / 3
: rd
: 1
: 2
: Eth 1/ 2
: 645 seconds
: 137
: 647/1
: Up
: Up
: Enabled
| CFM Commands
40
HAPTER