| VLAN Configuration
C
6
HAPTER
Protocol VLANs
W
I
EB
NTERFACE
To map a protocol group to a VLAN for a port or trunk:
Click VLAN, Protocol.
1.
Select Configure Interface from the Step list.
2.
Select Add from the Action list.
3.
Select a port or trunk.
4.
Enter the identifier for a protocol group.
5.
Enter the corresponding VLAN to which the protocol traffic will be
6.
forwarded.
Click Apply.
7.
Figure 75: Assigning Interfaces to Protocol VLANs
To show the protocol groups mapped to a port or trunk:
Click VLAN, Protocol.
1.
Select Configure Interface from the Step list.
2.
Select Show from the Action list.
3.
Figure 76: Showing the Interface to Protocol Group Mapping
– 188 –