| LLDP Commands
C
39
HAPTER
lldp dot1-tlv vlan-
name
lldp dot3-tlv link-agg
This command configures an LLDP-enabled port to advertise its VLAN
name. Use the no form to disable this feature.
S
YNTAX
[no] lldp dot1-tlv vlan-name
D
S
EFAULT
ETTING
Enabled
C
M
OMMAND
ODE
Interface Configuration (Ethernet, Port Channel)
C
U
OMMAND
SAGE
This option advertises the name of all VLANs to which this interface has
been assigned. See
"switchport allowed vlan" on page 834
vlan protocol-group (Configuring Interfaces)" on page
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv vlan-name
Console(config-if)#
This command configures an LLDP-enabled port to advertise link
aggregation capabilities. Use the no form to disable this feature.
S
YNTAX
[no] lldp dot3-tlv link-agg
D
S
EFAULT
ETTING
Enabled
C
M
OMMAND
ODE
Interface Configuration (Ethernet, Port Channel)
C
U
OMMAND
SAGE
This option advertises link aggregation capabilities, aggregation status of
the link, and the 802.3 aggregated port identifier if this interface is
currently a link aggregation member.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot3-tlv link-agg
Console(config-if)#
– 944 –
and
"protocol-
849.