Clear Network-Access; Show Network-Access - Edge-Core ES3510MA-DC Management Manual

Use this command to clear entries from the secure MAC addresses table.
clear network-
access
S
YNTAX
clear network-access mac-address-table [static | dynamic]
D
EFAULT
None
C
OMMAND
Privileged Exec
E
XAMPLE
Console#clear network-access mac-address-table interface ethernet 1/1
Console#
Use this command to display the MAC authentication settings for port
show network-
interfaces.
access
S
YNTAX
show network-access [interface interface]
D
EFAULT
Displays the settings for all interfaces.
C
OMMAND
Privileged Exec
[address mac-address] [interface interface]
static - Specifies static address entries.
dynamic - Specifies dynamic address entries.
mac-address - Specifies a MAC address entry. (Format: xx-xx-xx-
xx-xx-xx)
interface - Specifies a port interface.
ethernet unit/port
unit - This is unit 1.
port - Port number.
(Range: 1-10)
S
ETTING
M
ODE
interface - Specifies a port interface.
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
S
ETTING
M
ODE
– 665 –
| General Security Measures
C 25
HAPTER
Network Access (MAC Address Authentication)