Mep Archive-Hold-Time; Clear Ethernet Cfm Maintenance-Points Remote - Edge-Core ES3510MA-DC Management Manual

mep archive-hold-
time
clear ethernet cfm
maintenance-points
remote
E
XAMPLE
This example enables SNMP traps for mep-up events.
Console(config)#snmp-server enable traps ethernet cfm cc mep-up
Console(config)#
R C
ELATED OMMANDS
ethernet cfm mep crosscheck (988)
This command sets the time that data from a missing MEP is retained in
the continuity check message (CCM) database before being purged. Use
the no form to restore the default setting.
S
YNTAX
mep archive-hold-time hold-time
hold-time – The time to retain data for a missing MEP.
(Range: 1-65535 minutes)
D S
EFAULT ETTING
100 minutes
C M
OMMAND ODE
CFM Domain Configuration
C U
OMMAND SAGE
A change to the hold time only applies to entries stored in the database
after this command is entered.
E
XAMPLE
This example sets the aging time for missing MEPs in the CCM database to
30 minutes.
Console(config)#ethernet cfm domain index 1 name voip level 3
Console(config-ether-cfm)#mep archive-hold-time 30
Console(config-ether-cfm)#
This command clears the contents of the continuity check database.
S
YNTAX

clear ethernet cfm maintenance-points remote

[domain domain-name | level level-id]
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
level-id – Maintenance level. (Range: 0-7)
– 983 –
| CFM Commands
C 40
HAPTER