Banner Configure Equipment-Info - Edge-Core ES3510MA-DC Management Manual

| System Management Commands
C 21
HAPTER
Banner Information
banner configure
equipment-info
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Input strings cannot contain spaces. The banner configure department
command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested
for situations where white space is necessary for clarity.
E
XAMPLE
Console(config)#banner configure department R&D
Console(config)#
This command is used to configure the equipment information displayed in
the banner. Use the no form to restore the default setting.
S
YNTAX
banner configure equipment-info manufacturer-id mfr-id
floor floor-id row row-id rack rack-id shelf-rack sr-id
manufacturer mfr-name
no banner configure equipment-info [floor | manufacturer |
manufacturer-id | rack | row | shelf-rack]
mfr-id - The name of the device model number.
floor-id - The floor number.
row-id - The row number.
rack-id - The rack number.
sr-id - The shelf number in the rack.
mfr-name - The name of the device manufacturer.
Maximum length of each parameter: 32 characters
D S
EFAULT ETTING
None
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Input strings cannot contain spaces. The banner configure equipment-
info command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested
for situations where white space is necessary for clarity.
– 512 –