Logging Facility - Edge-Core ES3510MA-DC Management Manual

Table 48: Event Logging Commands (Continued)
Command
logging trap
clear log
show log
show logging
This command sets the facility type for remote logging of syslog messages.

logging facility

Use the no form to return the type to the default.
S
YNTAX
logging facility type
no logging facility
D
EFAULT
23
C
OMMAND
Global Configuration
C
OMMAND
The command specifies the facility type tag sent in syslog messages. (See
RFC 3164.) This type has no effect on the kind of messages reported by
the switch. However, it may be used by the syslog server to sort messages
or to store messages in the corresponding database.
E
XAMPLE
Console(config)#logging facility 19
Console(config)#
Function
Limits syslog messages saved to a remote server
based on severity
Clears messages from the logging buffer
Displays log messages
Displays the state of logging
type - A number that indicates the facility used by the syslog server
to dispatch log messages to an appropriate service. (Range: 16-23)
S
ETTING
M
ODE
U
SAGE
– 545 –
| System Management Commands
C 21
HAPTER
Event Logging
Mode
GC
PE
PE
PE