Ip Igmp Filter (Global Configuration) - Edge-Core ES3510MA-DC Management Manual

| Multicast Filtering Commands
C 38
HAPTER
IGMP Filtering and Throttling
ip igmp filter (Global
Configuration)
Table 130: IGMP Filtering and Throttling Commands (Continued)
Command Function
ip igmp max-groups Sets the IGMP throttling action for an interface
action
show ip igmp filter Displays the IGMP filtering status
show ip igmp profile Displays IGMP profiles and settings
show ip igmp throttle Displays the IGMP throttling setting for interfaces
interface
This command globally enables IGMP filtering and throttling on the switch.
Use the no form to disable the feature.
S
YNTAX
[no] ip igmp filter
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
IGMP filtering enables you to assign a profile to a switch port that
◆
specifies multicast groups that are permitted or denied on the port. An
IGMP filter profile can contain one or more, or a range of multicast
addresses; but only one profile can be assigned to a port. When
enabled, IGMP join reports received on the port are checked against the
filter profile. If a requested multicast group is permitted, the IGMP join
report is forwarded as normal. If a requested multicast group is denied,
the IGMP join report is dropped.
◆ IGMP filtering and throttling only applies to dynamically learned
multicast groups, it does not apply to statically configured groups.
The IGMP filtering feature operates in the same manner when MVR is
◆
used to forward multicast traffic.
E
XAMPLE
Console(config)#ip igmp filter
Console(config)#
– 916 –
Mode
IC
PE
PE
PE