Configuring An Extended Ipv4 Acl - Edge-Core ES3510MA-DC Management Manual

C
ONFIGURING AN
E IP 4 ACL
XTENDED V
Click Apply.
9.
Figure 176: Configuring a Standard IPv4 ACL
Use the Security > ACL (Configure ACL - Add Rule - IP Extended) page to
configure an Extended IPv4 ACL.
CLI R
EFERENCES
"permit, deny (Extended IPv4 ACL)" on page 700
◆
"show ip access-list" on page 703
◆
"Time Range" on page 560
◆
P
ARAMETERS
These parameters are displayed:
Type – Selects the type of ACLs to show in the Name list.
◆
Name – Shows the names of ACLs matching the selected type.
◆
◆ Action – An ACL can contain any combination of permit or deny rules.
Source/Destination Address Type – Specifies the source or
◆
destination IP address. Use "Any" to include all possible addresses,
"Host" to specify a specific host address in the Address field, or "IP" to
specify a range of addresses with the Address and Subnet Mask fields.
(Options: Any, Host, IP; Default: Any)
◆ Source/Destination IP Address – Source or destination IP address.
Source/Destination Subnet Mask – Subnet mask for source or
◆
destination address. (See the description for Subnet Mask on
page 314.)
Source/Destination Port – Source/destination port number for the
◆
specified protocol type. (Range: 0-65535)
– 315 –
| Security Measures
C 14
HAPTER
Access Control Lists