Siemens SINUMERIK 840D sl Operating Manual page 137

Proceed as follows
...
Note
Copying files in the same directory
You cannot copy files to the same directory. You must copy the file under a new name.
HMI sl Universal
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
1. Select the "Program manager" operating area.
2. Choose the desired storage location and position the cursor on the file
or directory which you would like to copy.
3. Press the "Copy" soft key.
4. Select the directory in which you want to paste your copied
directory/program.
5. Press the "Paste" softkey.
If a directory/program of the same name already exists in this
directory, a prompt asks whether you want to overwrite the existing
directory or paste it under a different name.
If the name contains illegal characters or is too long, a prompt will
appear for you to enter a permissible name.
6. Press the "OK" or "Overwrite all" softkey if you want to overwrite
existing directories/programs.
- OR -
Press the "No overwriting" softkey if you do not want to overwrite
already existing directories/programs.
- OR -
Press the "Skip" softkey if the copy operation is to be continued with
the next file.
- OR -
Enter another name if you want to paste the directory/program under
another name and press the "OK" softkey.
8.6 Copying and pasting directories/programs
Program management
137