Siemens SINUMERIK 840D sl Operating Manual page 16

Introduction
1.3 Machine control panels
(1)
(2)
(3)
(4)
(5)
(6)
(7)
16
EMERGENCY STOP button
Activate the button in situations where
life is at risk.
•
there is the danger of a machine or workpiece being damaged.
•
All drives will be stopped with the greatest possible braking torque.
Machine manufacturer
For additional responses to pressing the Emergency Stop button, please
refer to the machine manufacturer's instructions.
Installation locations for control devices (d = 16 mm)
RESET
Stop processing the current programs.
•
The NCK control remains synchronized with the machine. It is in its
initial state and ready for a new program run.
Cancel alarm.
•
Program control
SINGLE BLOCK
Single block mode on/off.
CYCLE START
Starts execution of a program.
CYCLE STOP
Stops execution of a program.
Operating modes, machine functions
JOG
Select "JOG" mode.
TEACH IN
Select "Teach In" submode.
MDA
Select "MDA" mode.
AUTO
Select "AUTO" mode.
REPOS
Repositions, re-approaches the contour.
REF POINT
Approach reference point.
Inc VAR (incremental feed variable)
Incremental mode with variable increment size.
Inc (Incremental feed)
Incremental mode with predefined increment size of 1, ..., 10000
...
increments.
Customer keys
T1 to T15
Traversal axes with rapid traverse superposition and coordinate exchange
Machine manufacturer
A machine data code defines how the increment value is
interpreted.
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal