Displaying Messages - Siemens SINUMERIK 840D sl Operating Manual

11.2

Displaying messages

PLC and part program messages may be issued during machining.
These message will not interrupt the program execution. Messages provide information with
regard to a certain behavior of the cycles and with regard to the progress of machining and
are usually kept beyond a machining step or until the end of the cycle.
Overview of messages
You can display all issued messages.
The message overview contains the following information:
• Date
• Message number
• Message text
Proceed as follows
HMI sl Universal
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
is only displayed for PLC messages
1. Select the "Diagnosis" operating area.
2. Press the "Messages" softkey.
The "Messages" window appears.
Alarm, error, and system messages
11.2 Displaying messages
159